sales@ashokamachines.com |  +91-120-2340031/32 | CONTACT US | REQUEST CALL BACK  |  SEND ENQUIRY

Heavy Fabrication Work Ashoka Machines Tools Corporation
Heavy Fabrication Work Capacity

ASHOKA one of the leading sugar plant manufacturers, offers one stop solution for modern & right from concept to commissioning. After obtaining the broad requirements from a prospect client the most suitable project in terms of capacity and equipment selection are worked upon by our specialists and experienced consultants.

Heavy Fabrication Work – OVERVIEW


ASHOKA offers a convenient combination of a heavy fabrication and machining under the same roof. Equipment fabrication is carried out as per international welding procedures (WPS as per IS, BS, ASME) and material standards as per customer drawings and using special purpose modern welding equipment of various types including profiles cutters, SAW/ARC/MIG/TIG welding machines, bending and rolling machines, special holding and rotating equipment for efficient welding, surface treatment (shot/sand blasting), heat treatment etc.

The same equipment is finish machined on imported floor and horizontal borers, vertical turret lathes, heavy duty turning lathes, floor drills, gear cutting hobbers etc. ASHOKA has a lifting and handling capacity of 75 MT single piece.

ASHOKA can manufacture overhead heavy fabrication for Heavy Fabrication Work, and parts as per customer spans and requirements. The type of cranes manufactured include :

Single & double girder overhead cranes (bridge cranes)
Electric wire rope overhead hoists
Structural fabrication for any type of crane including
Rope drum fabrication and finish machining as per customer requirements

Heavy Fabrication Work Various heavy fabrication jobs are being undertaken, such as : 

Kiln and Mill shells
Heavy duty bed frames
Vessels
Storage tanks silos & hoppers
Housings & frames
Structural works
Crane fabrication
Material handling equipment
Hydro power equipment
Steel plant equipment
Special custom made equipment

Type of Equipment

Heavy Fabrication Work Various heavy fabrication jobs are being undertaken such as : 

Kiln and Mill shells
Heavy duty bed frames
Vessels
Storage tanks silos & hoppers
Housings & frames
Structural works
Crane fabrication
Material handling equipment
Hydro power equipment
Steel plant equipment
Special custom made equipment

Heavy Fabrication Work Materials

Various grades of steels as per national and international standard are used for equipment fabrication. All plates and sections are of tested quality from well recognized suppliers including European suppliers. Some of the common grades of steels used are : 

IS 2062 Grade A/B/C
IS 2002 Grade I/II/III Boiler Quality
ASME SA 516 Grade 60/65/70
ASTM A 516 Grade 60/65/70